Wagster Mod 1.5 for Artillery Genius

[linsenpago]

Hi!

I installed today your firmware out of version 1.5 so that i can use my BLtouch.

But now i have a lot of busy entries on the terminal of octoprint... it looks like this:

Recv:  T:215.36 /220.00 B:79.54 /80.00 @:52 B@:9 W:9
Recv: echo:busy: processing
Recv:  T:214.69 /220.00 B:79.56 /80.00 @:58 B@:8 W:9
Recv:  T:214.53 /220.00 B:79.47 /80.00 @:59 B@:13
Recv:  T:214.53 /220.00 B:79.47 /80.00 @:59 B@:13 W:9
Recv: echo:busy: processing
Recv:  T:214.61 /220.00 B:79.56 /80.00 @:57 B@:9 W:9
Recv:  T:214.38 /220.00 B:79.55 /80.00 @:60 B@:10
Recv:  T:214.38 /220.00 B:79.55 /80.00 @:60 B@:10 W:9
Recv: echo:busy: processing
Recv:  T:214.53 /220.00 B:79.55 /80.00 @:59 B@:11 W:9
Recv:  T:215.00 /220.00 B:79.58 /80.00 @:55 B@:10
Recv:  T:215.00 /220.00 B:79.58 /80.00 @:55 B@:10 W:9
Recv: echo:busy: processing
Recv:  T:215.68 /220.00 B:79.62 /80.00 @:50 B@:9 W:9


do you have any ideas why this is now happening?

I also see that the movement of the printhead is not so smooth as before... it stutters...

Any ideas?

greetings,
Alexander

[linsenpago]

I now printing the first object with the new firmware and with well tuned settings out of cura... and it turns out awful.. :-(

Did i miss something or is there so much different to the stock firmware?

[daldridge]

My print looks the same after completing the upgrade. Did you ever find a fix?

[Lenox]

My genius heating bed with 1.5 firmware heat quickly near the good value, ( about  value -8°C) but after it's very slow and i have an error of heating time. I think the pid value is not correct.
a lot of time, i need to reboot, because it doesn't work for a new operation. For example, after à small print, change the filament.