Author Topic: BLTouch Issues after installing Hemera  (Read 366 times)

LegacyOfBob

  • Newbie
  • *
  • Posts: 2
    • View Profile
BLTouch Issues after installing Hemera
« on: May 17, 2021, 11:31:45 AM »
Hello, I was using the X1 stock with an added BLTouch via Waggster firmware 1.5. The BLTouch worked fine but I've just completed an extruder upgrade to a Hemera and now the BLtouch just kinda "flickers" and doesn't deploy, etc. I did download the Waggster firmware and make the changes described in the E3D Dozuki guide but trying to home Z no longer works, The probe doesn't deploy and the carriage moves towards the bed without stopping. I'm wondering if anyone has done this before and maybe has some idea of what I've missed.

I made these changes to the Waggster firmware (in the experts only folder)
https://e3d-online.dozuki.com/Guide/Hemera+Artillery+(Evnovo)+Sidewinder+X1+Firmware+Modification/121

LegacyOfBob

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: BLTouch Issues after installing Hemera
« Reply #1 on: May 19, 2021, 08:02:13 PM »
Turns out some of the BLTouch wires were shorting against each other after I had moved things around. Everything is working great now!