Author Topic: M600 on Sidewinder X1 waggster 1.5?!  (Read 939 times)

Chazy

  • Newbie
  • *
  • Posts: 6
    • View Profile
M600 on Sidewinder X1 waggster 1.5?!
« on: September 03, 2020, 02:43:00 PM »
Firstly, thank you for this firmware! 🙏
I would like to know if the m600 command works with this version..
And if there's any chance to see the Marlin 2.0.6.
Thank you so much!

Chazy

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #1 on: September 10, 2020, 03:32:28 PM »
Nothing?!

Waggster

  • Administrator
  • Full Member
  • *****
  • Posts: 175
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #2 on: September 11, 2020, 04:02:57 PM »
Hi, Yes and no... It will work with the mainboard firmware but wont work with the touchscreen :-(  you have no way of pressing continue that I know of.

Sorry,

Steve

Chazy

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #3 on: September 12, 2020, 03:04:11 PM »
Thank you for replying 🙏
I saw a firmware (rawr I guess) that integrates m600 with touchscreen too on stock sidewinder x1.. so I thought that, if a release with marlin 2.0.6 will be released, could be integrated.
Thanks again Steve 🙏


Chazy

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #4 on: September 17, 2020, 07:27:14 AM »
Hope this project will not be abandoned couse your firmware is the BEST ONE for the sidewinder x1!

Hi, Yes and no... It will work with the mainboard firmware but wont work with the touchscreen :-(  you have no way of pressing continue that I know of.

Sorry,

Steve
« Last Edit: September 17, 2020, 01:45:45 PM by Chazy »

Mofman

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #5 on: January 01, 2021, 05:47:37 PM »
Just to confirm to anyone curious the Waggster mainboard firmware combined with RAWR TFT firmware seems to allow M600 to work just fine. I've not encountered any issues so far with this combination.

MrOo

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #6 on: February 07, 2021, 09:42:55 AM »
Hello,

I'm a novice but if i'm understanding correctly i just have to flash the tft firmware from RAWR-TFT on top of the modification that I made from wragger on the board (same process that waggster explained > with SD card). And I'm good to go with my new bltouch + M600 on top?

I'm so greatfull to those creator/hacker for those upgrades on our x1!

DocEmmetBrown

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: M600 on Sidewinder X1 waggster 1.5?!
« Reply #7 on: February 18, 2021, 09:41:34 AM »
As mentioned in my first post, I am also new here. If I understand correctly now, I keep the Waggster 1.5 firmware on the board and flash the RAWR TFT on the display, then I have M600 and Waggster BL Touch?
What about the babystep buttons now? Are they still there? Or the Z-Offset key? I need them urgently. It is not always that the Nozzle height is not correct. But now and then I have to correct.

Than i will wait for my ordered Makerbase Wifi module and flash the RAWR-TFT with the rigth Wifi settings.

Can anyone give an answer to this?

Doc

Translated with www.DeepL.com/Translator (free version)