3DUK
3DUK => 3DUK Firmware => Topic started by: linsenpago on May 27, 2020, 09:42:49 AM
-
Hi!
I installed today your firmware out of version 1.5 so that i can use my BLtouch.
But now i have a lot of busy entries on the terminal of octoprint... it looks like this:
Recv: T:215.36 /220.00 B:79.54 /80.00 @:52 B@:9 W:9
Recv: echo:busy: processing
Recv: T:214.69 /220.00 B:79.56 /80.00 @:58 B@:8 W:9
Recv: T:214.53 /220.00 B:79.47 /80.00 @:59 B@:13
Recv: T:214.53 /220.00 B:79.47 /80.00 @:59 B@:13 W:9
Recv: echo:busy: processing
Recv: T:214.61 /220.00 B:79.56 /80.00 @:57 B@:9 W:9
Recv: T:214.38 /220.00 B:79.55 /80.00 @:60 B@:10
Recv: T:214.38 /220.00 B:79.55 /80.00 @:60 B@:10 W:9
Recv: echo:busy: processing
Recv: T:214.53 /220.00 B:79.55 /80.00 @:59 B@:11 W:9
Recv: T:215.00 /220.00 B:79.58 /80.00 @:55 B@:10
Recv: T:215.00 /220.00 B:79.58 /80.00 @:55 B@:10 W:9
Recv: echo:busy: processing
Recv: T:215.68 /220.00 B:79.62 /80.00 @:50 B@:9 W:9
do you have any ideas why this is now happening?
I also see that the movement of the printhead is not so smooth as before... it stutters...
Any ideas?
greetings,
Alexander
-
I now printing the first object with the new firmware and with well tuned settings out of cura... and it turns out awful.. :-(
Did i miss something or is there so much different to the stock firmware?
-
My print looks the same after completing the upgrade. Did you ever find a fix?
-
My genius heating bed with 1.5 firmware heat quickly near the good value, ( about value -8°C) but after it's very slow and i have an error of heating time. I think the pid value is not correct.
a lot of time, i need to reboot, because it doesn't work for a new operation. For example, after à small print, change the filament.