Wanhao D9 Waggster Firmware v1.0
D9 Mk2 - Waggster v1.0.zip
Filesize: 18.62MB  Views: (1520)  Downloads (604)  Last Download: October 27, 2020, 02:41:27 PM 
Previous Download | Next Download
Description: Well after a quite a bit of time and effort I'm pleased to release some new firmware for the Wanhao D9 mk2

This will work on the following
D9 Mk2 Factory 300/400/500
D9 Mk2 Upgrade 300/400/500



The firmware is based on Marlin 2.0.3 with DWIN Touchscreen built-in.  It was taken from Tiny Machines version they use on the CR10 Pro, so a big thanks to them for sharing.  The source IS included in the zip file but so are the pre-compiled hex files to make it easy for everyone.

Quote

http://pretendprusa.co.uk
https://www.patreon.com/cdrskull

by Steve Wagg (CdRsKuLL) 20th Feb 2020

Wanhao Waggster release v1.0 firmware (based on CR10s Pro released by TinyMachines, big thanks to them)

You will need to update both your touchscreen and your mainboard firmware, doing just one wont work.

MAINBOARD FIRMWARE
To flash your mainboard either use the arduino IDE or you can flash the hex directly via PrusaSlicer or Cura etc..

TOUCHSCREEN FIRMWARE
To flash your touchscreen you will need to remove the base, put the DWIN_SET folder on the root of a microSD card and insert it inside, directly into the touchscreen and power on.
Make sure your SDCARD is smaller than 16GB and formatted FAT32 - Allocation size 4096 bytes

DONT FORGET TO RESET YOUR EEPROM
Once you have flashed both you might need to run the following commands to reset your eeprom M502 and M500. OR Press the 'Initialize Eeprom in the Settings / Tools menu

PRUSA SLICER PROFILES
I've spent a bit of time on these profiles. Download Prusaslicer from https://www.prusa3d.com/prusaslicer/ and install.... Then click File, Import, Import config bundle and select the one in the folder here.. :-)

If you find this useful please check out my Patreon page for more goodies coming soon....   https://www.patreon.com/cdrskull


I hope it comes in useful :-)

Posted by: CdRsKuLL February 22, 2020, 03:17:28 AM

Rating: This download has not been rated yet.

Comments