---

I managed to get hold of a CR10 V2 for a price I just couldn't say no. I wanted a new challenge of designing up an 'all in one' printer that gets rid of the controller box and all those cables.

The project has now been completed and I'm currently tweaking a new Marlin 2.0.5 firmware as the one shipped was shocking and didn't really work very well.

This is now one of my favorite printers and if you are after something in the lower end price bracket then I would recommend this, obviously with this mod and the firmware :-)

So.. here are some photos and instructions.  The STL's are in the download section for this - https://pretendprusa.co.uk/index.php?action=downloads;cat=9



















Conversion kit to get rid of the external control and PSU.

Conversion items required

LCD Mount
2 off M4x10 (cap head or dome) set screws
2 off M4 T-Nuts

PSU Mount
2 off M3x10 (dome) set screws for the power connector
2 off...

---

Just completed and uploaded my review of the Steadytech Pro X Printer.

---

Waggster BLTouch V1.0

https://pretendprusa.co.uk/index.php?action=downloads;sa=view;down=9

BLTouch for the Artillery Sidewinder X1

The download link is just above... :-)

Expected upgrade time 30 minutes
Technical level - medium



Includes
BLTouch LED wires mod
MKS Gen L1.0 Marlin 1.19 / 2.0 Firmware (recommended)
MKS 2.8 TFT LCD Firmware
PrusaSlicer Profiles

Please read the included PDF and watch the video below.

---

Just completed and uploaded my review of the Steadytech Pro X Printer.